This website is not available in this screen resolution
Subscribe Contact us

la cosa Handlebars

Suitable for La Cosa 1 black / white and Soft
INSERTING THE NEW HANDLEBAR: (the operation must be carried out by an adult)  
  • the handlebar has an insertion direction indicated by the sticker; when positioning it, the sticker must face the seat;
 
  • if the sticker has been removed, look at the base of the handlebar and the hole in the body: the rounded part of the handlebar goes towards the front of the product, while the angled part goes towards the seat.
  • Press the handlebar until it clicks and check that it cannot be pulled out;
For any further information or explanation please contact the support service via email: customercare@italtrike.com; An unintentional mistake? Has the handlebar been inserted incorrectly? Do you need to remove it? No problem, The handlebar replacement in la cosa ride-on for toddlers is a fairly simple operation that it is recommended to be carried out by an adult to check the safety of the product.   Read the instructions below. And if you need to buy a new handlebar, it’s just a click away.
Clear
Additional information
  • Turn the ride-on upside down, with the wheels facing you;
  • Remove the four screws on all four wheels with a screwdriver and store them separately (away from children);
  • lift the base from the body/product;
  • Use pliers to press the two tabs of the handlebar into the product and push it out;
  • place the base on the body;
  • Screw all 4 wheels together, making sure that the ones that turn 360 degrees are positioned at the front of the product and the two fixed wheels are positioned at the rear;
  • all screws must be firmly secured on the product for its safety;
Age and ability
Age of the child: Recommended for children of 2 / 3 / 4 / 5 / 6 / 7 / 8 / Years
Safety
Certifications:
  • REACH, Allegato XVII ; IPA – ZEK 01.4-08 – Cat. 1;
  • EN 71-1:2018 ; EN 71-2:2014; EN 71-3:2019
  • AS/NZS ISO 8124
  • ISO 8124:2018
  • Canada Toys Regulations – SOR/2011-17
  • 16 C.F.R. 1303
  • ASTM F963-16
  • California proposition 65 – contenuto Di-n-esil ftalato
Warranty
Type of guarantee: This product is guaranteed for 5 years for its metal parts, and 2 years for its plastic parts
Production batch: Check the Po number under the saddle (silver sticker)
Carta d'identità: la cosa Handlebars
E' un prodotto riciclabile al:
Scarica la carta d'identità del prodotto